Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

DS218play low speed?

#1
Hi!

I´ve been watching so many of your informative videos on Youtube. Thank you so much for making them! They were the reason why I decided to go for a NAS instead og a normal ssd drive. But, now Im having trouble video editing 4K material in Davinci Resolve. I have two Seagate 7 TB disk configured in SHR. And they are not nearly full. I use a cat6 cable and a Sonnet Eternet - thunderbolt swith. The iMac is from 2020, with a 10GBE port. Still my reading/writing speed is only 112 MB/s. Is this the best I can hope for? In that case I really regret the whole purchase. Please tell me if there is any chance I can get better speeds than this.

My iMac network settings are: IPv4: with DHCP. Configure: manually. Speed: 10Gbase-T. Duplex: full duplex. MTU: Jumbo (9000).

If you have any idea how to improve this I would really appreciate it!

Best,

Olaug Smile
Reply
#2
DS218play is a 1GbE NAS, this is the max you will get. In order to get a better speed then you should consider TS-253Be/ TS253D with a 10GbE card. This would be the cheapest option to utilise 10GbE connectivity. Two drives could potentially give you speeds around 300MB/s (RAID1, could be faster with RAOD0). If you had dual SSD then up to 700MB/s. Either way, speed would be enough for 4K editing.The most professional solution would be DS1621+ or DS1621xs+ or Qnap Thunderbolt models. Bit these are fairly expensive. For a single editor, external SSD would be all you need if file sharing is not required.I hope this helps.
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)