11-28-2022, 08:45 PM
Hi all
Is the QXG-10G2T-X710 supported on the TVS-H74 series?
I'm running into a problem where it's only getting to the Booting... stage and then freezing. Take the card out and everything works fine, albeit without the 10Gbe.
According to the QNAP datasheet it says it should work on any QNAP NAS with a free PCIe card slot and the TVS-H74 has two!
Thoughts? Was this a bad idea to get two 10Gbe ports on a TVS-H74 for a bit of future-proofing.
Thanks in advance...
Is the QXG-10G2T-X710 supported on the TVS-H74 series?
I'm running into a problem where it's only getting to the Booting... stage and then freezing. Take the card out and everything works fine, albeit without the 10Gbe.
According to the QNAP datasheet it says it should work on any QNAP NAS with a free PCIe card slot and the TVS-H74 has two!
Thoughts? Was this a bad idea to get two 10Gbe ports on a TVS-H74 for a bit of future-proofing.
Thanks in advance...