05-05-2023, 03:03 PM
Yes, it is definitely doable to convert your Raspberry Pi into a NAS using OpenMediaVault and an HDD dock. However, you should keep in mind that this setup may not be as reliable or scalable as a dedicated NAS system, and may not be able to provide the same level of performance or features.
If you decide to go for a dedicated NAS system, there are many options available in the market from different brands such as Synology, QNAP, and Asustor. These brands offer different models with various features, so it is important to choose one that fits your specific needs and budget.
When it comes to hard drives, it is important to choose ones that are designed for NAS use, such as Western Digital Red or Seagate IronWolf. The number and capacity of the hard drives you choose will depend on your budget and storage needs. However, as a general rule, it is recommended to use at least two hard drives in a RAID configuration for data redundancy and protection against drive failure.
As for the RAID level, it depends on your specific needs and priorities. RAID 1 (mirroring) provides data redundancy by writing the same data to two drives, while RAID 5 or RAID 6 (striping with parity) offer better capacity utilization and protection against single or multiple drive failures. RAID 10 (striping and mirroring) is a more advanced and expensive option that provides both high performance and data redundancy.
If you decide to go for a dedicated NAS system, there are many options available in the market from different brands such as Synology, QNAP, and Asustor. These brands offer different models with various features, so it is important to choose one that fits your specific needs and budget.
When it comes to hard drives, it is important to choose ones that are designed for NAS use, such as Western Digital Red or Seagate IronWolf. The number and capacity of the hard drives you choose will depend on your budget and storage needs. However, as a general rule, it is recommended to use at least two hard drives in a RAID configuration for data redundancy and protection against drive failure.
As for the RAID level, it depends on your specific needs and priorities. RAID 1 (mirroring) provides data redundancy by writing the same data to two drives, while RAID 5 or RAID 6 (striping with parity) offer better capacity utilization and protection against single or multiple drive failures. RAID 10 (striping and mirroring) is a more advanced and expensive option that provides both high performance and data redundancy.