10-25-2020, 06:28 AM
I'm interested in the QNAP TS-453D. NASCompares has shown it can work with 2x 16GB (32GB) capacity, HOWEVER, no conclusive memory tests were performed! Everyone, including NASCompares, just assumes if QTS can launch everything is working. Ridiculous.
Has anyone installed more than 8GB then run MEMTEST to confirm the CPU can actually read/write beyond the Intel-stated 8GB limit?
Having QTS simply boot or just running a VM within QTS while not using it are terrible tests considering how efficiently OS's and CPU's can handle resources these days.
A valid test would be to fill the memory beyond the advertised 8GB capacity and see what happens.
## QNAP x53 series CPU - Intel J4125 Spec Sheet: https://tinyurl.com/y3m3ojfz
## QNAP MemTest: https://wiki.qnap.com/wiki/Memory_Test
## NASCompares x53D 32GB: https://www.youtube.com/watch?v=cv_8b916FU4
Has anyone installed more than 8GB then run MEMTEST to confirm the CPU can actually read/write beyond the Intel-stated 8GB limit?
Having QTS simply boot or just running a VM within QTS while not using it are terrible tests considering how efficiently OS's and CPU's can handle resources these days.
A valid test would be to fill the memory beyond the advertised 8GB capacity and see what happens.
## QNAP x53 series CPU - Intel J4125 Spec Sheet: https://tinyurl.com/y3m3ojfz
## QNAP MemTest: https://wiki.qnap.com/wiki/Memory_Test
## NASCompares x53D 32GB: https://www.youtube.com/watch?v=cv_8b916FU4