5 hours ago
Between the Zettlab D8 Ultra and the Ugreen IDX6011 Pro, you’re very close, but for your workload the better fit is actually the UGREEN NASync DXP8800 Plus, which gives you the same 8 bay flexibility as Zettlab but with a much more mature operating system, dual 10GbE, and NVMe support. It solves the two main concerns you raised: OS maturity and RAID layout flexibility, while still giving you the large RAID6 capacity you want for long term storage.
Zettlab has good hardware, but the OS is still young, the community is small, and features like SSH and third party OS support are only “coming soon”. For a system you want to run 24/7 for backups, fast file search, media serving, automation, and remote access, the software side is just as important as the hardware.
The IDX6011 Pro from Ugreen is solid, but only having 6 bays limits you to RAID5 if you want reasonable usable capacity. For long term safety and the kind of multi decade workloads you’re describing, RAID6 is the safer option.
This is why the UGREEN NASync DXP8800 Plus sits in the sweet spot:
It has 8 SATA bays, 2 NVMe slots, dual 10GbE, DDR5 up to 64GB, 8K HDMI, and UGOS Pro is far more polished than Zettlab OS. You get the expansion you want, the safety of RAID6, and an OS that already has indexing, AI search, backups, snapshotting, smart home integrations, and media serving built in.
Yes, you can start with 4 drives in RAID6 or RAID5 and expand the pool later without rebuilding from zero. Both Zettlab and Ugreen support online capacity expansion, but Ugreen’s implementation is currently more stable.
HDMI versions:
DXP8800 Plus supports 8K 60Hz
Zettlab D8 Ultra also supports 8K, but the implementation varies slightly by firmware.
If I were buying today for your exact workload of heavy storage, media, indexing, remote access, and long term expansion, I would choose the UGREEN DXP8800 Plus without hesitation because it removes all the software risks while giving you full 8 bay RAID6 capability and NVMe acceleration.
Here’s the Amazon search link for it:
https://www.amazon.com/s?k=UGREEN+DXP880...=ncmail-20
Zettlab has good hardware, but the OS is still young, the community is small, and features like SSH and third party OS support are only “coming soon”. For a system you want to run 24/7 for backups, fast file search, media serving, automation, and remote access, the software side is just as important as the hardware.
The IDX6011 Pro from Ugreen is solid, but only having 6 bays limits you to RAID5 if you want reasonable usable capacity. For long term safety and the kind of multi decade workloads you’re describing, RAID6 is the safer option.
This is why the UGREEN NASync DXP8800 Plus sits in the sweet spot:
It has 8 SATA bays, 2 NVMe slots, dual 10GbE, DDR5 up to 64GB, 8K HDMI, and UGOS Pro is far more polished than Zettlab OS. You get the expansion you want, the safety of RAID6, and an OS that already has indexing, AI search, backups, snapshotting, smart home integrations, and media serving built in.
Yes, you can start with 4 drives in RAID6 or RAID5 and expand the pool later without rebuilding from zero. Both Zettlab and Ugreen support online capacity expansion, but Ugreen’s implementation is currently more stable.
HDMI versions:
DXP8800 Plus supports 8K 60Hz
Zettlab D8 Ultra also supports 8K, but the implementation varies slightly by firmware.
If I were buying today for your exact workload of heavy storage, media, indexing, remote access, and long term expansion, I would choose the UGREEN DXP8800 Plus without hesitation because it removes all the software risks while giving you full 8 bay RAID6 capability and NVMe acceleration.
Here’s the Amazon search link for it:
https://www.amazon.com/s?k=UGREEN+DXP880...=ncmail-20