05-30-2025, 10:32 AM
Thanks for reaching out — sounds like you're off to a great start, and it's smart to take the Raspberry Pi route first to get your bearings. Now that you’re stepping up to full-blown NAS territory (and already have 2 x 14TB SAS drives), we’ll need to think a bit carefully about hardware compatibility, especially with SAS.
Here’s a breakdown of what to consider and what fits within your budget:
Key Things to Know About Your SAS Drives:
Most budget/home NAS systems (like Synology, QNAP, or UGREEN) are built for SATA, not SAS.
To use SAS drives properly, you’ll either need:
A NAS with a SAS-compatible backplane (rare in this price range), or
A DIY system with a SAS HBA card (like an LSI 9207-8i) that connects the drives directly via a breakout cable.
So if you want to use those 14TB SAS drives, you're almost certainly looking at a DIY NAS build — and that’s a good match for someone who enjoys the challenge and flexibility.
Best Approach in Your Budget (~$450):
DIY NAS with TrueNAS SCALE or Unraid
Use a small form factor PC or mini server.
Add an LSI SAS HBA card (flashed to IT mode).
Run TrueNAS SCALE or Unraid from a USB or SSD.
Great for learning, supports media server apps (Plex, Jellyfin, etc.).
Hardware suggestions:
Look for used Dell PowerEdge T30, Lenovo TS140/TS440, or HP MicroServer Gen8/Gen10 — sometimes available refurbished for ~$200–$300.
Add your SAS HBA (LSI 9207-8i or similar) for $50–$80.
Use the rest of your budget for RAM upgrade or boot SSD.
What You Shouldn’t Buy:
Off-the-shelf 2-bay NAS like Synology DS224+ or QNAP TS-230 — they won’t accept SAS drives, and you’ll be locked out of using the drives you already bought.
USB enclosures — not reliable for long-term media server use.
Here’s a breakdown of what to consider and what fits within your budget:
Key Things to Know About Your SAS Drives:
Most budget/home NAS systems (like Synology, QNAP, or UGREEN) are built for SATA, not SAS.
To use SAS drives properly, you’ll either need:
A NAS with a SAS-compatible backplane (rare in this price range), or
A DIY system with a SAS HBA card (like an LSI 9207-8i) that connects the drives directly via a breakout cable.
So if you want to use those 14TB SAS drives, you're almost certainly looking at a DIY NAS build — and that’s a good match for someone who enjoys the challenge and flexibility.
Best Approach in Your Budget (~$450):
DIY NAS with TrueNAS SCALE or Unraid
Use a small form factor PC or mini server.
Add an LSI SAS HBA card (flashed to IT mode).
Run TrueNAS SCALE or Unraid from a USB or SSD.
Great for learning, supports media server apps (Plex, Jellyfin, etc.).
Hardware suggestions:
Look for used Dell PowerEdge T30, Lenovo TS140/TS440, or HP MicroServer Gen8/Gen10 — sometimes available refurbished for ~$200–$300.
Add your SAS HBA (LSI 9207-8i or similar) for $50–$80.
Use the rest of your budget for RAM upgrade or boot SSD.
What You Shouldn’t Buy:
Off-the-shelf 2-bay NAS like Synology DS224+ or QNAP TS-230 — they won’t accept SAS drives, and you’ll be locked out of using the drives you already bought.
USB enclosures — not reliable for long-term media server use.