11-01-2024, 04:35 PM
Thanks for reaching out, and I appreciate your kind words about the reviews!
Setting up a direct connection between your Terramaster F4-424 Pro NAS and your PC is a great way to ensure faster access to your video and photo files, especially since your PC is far from the router. Here’s how to do it:
Steps to Connect Your NAS Directly to Your PC:
Use a Network Cable:
Connect an Ethernet cable from the NAS directly to the LAN port on your PC.
Configure Network Settings on Your PC:
Go to Control Panel > Network and Sharing Center > Change adapter settings.
Right-click on your Ethernet connection and select Properties.
Select Internet Protocol Version 4 (TCP/IPv4) and click on Properties.
Choose Use the following IP address and enter the following settings:
IP address: 192.168.1.2 (or any private IP not in use)
Subnet mask: 255.255.255.0
Default gateway: Leave it blank.
Click OK to save your settings.
Configure the NAS Network Settings:
Access the TOS interface of your Terramaster NAS.
Go to Settings > Network > Network Interface.
Set the static IP of the NAS to 192.168.1.1 (this should match your subnet).
Save the settings.
Access Shared Folders:
Once both devices are configured, you should be able to access the NAS from your PC.
Open File Explorer and type \\192.168.1.1 into the address bar to access shared folders.
You may need to log in with your NAS credentials.
Additional Tips:
Check Hypercache Performance: Since you have SSDs set up for Hypercache, ensure that the caching is configured correctly to improve access speeds further.
Use a Fast Ethernet Connection: While you mentioned having a 2.4 LAN port, if possible, consider upgrading to a Gigabit Ethernet port for improved speeds.
This setup should give you a direct and fast connection to your NAS, allowing you to store and retrieve files efficiently.
Setting up a direct connection between your Terramaster F4-424 Pro NAS and your PC is a great way to ensure faster access to your video and photo files, especially since your PC is far from the router. Here’s how to do it:
Steps to Connect Your NAS Directly to Your PC:
Use a Network Cable:
Connect an Ethernet cable from the NAS directly to the LAN port on your PC.
Configure Network Settings on Your PC:
Go to Control Panel > Network and Sharing Center > Change adapter settings.
Right-click on your Ethernet connection and select Properties.
Select Internet Protocol Version 4 (TCP/IPv4) and click on Properties.
Choose Use the following IP address and enter the following settings:
IP address: 192.168.1.2 (or any private IP not in use)
Subnet mask: 255.255.255.0
Default gateway: Leave it blank.
Click OK to save your settings.
Configure the NAS Network Settings:
Access the TOS interface of your Terramaster NAS.
Go to Settings > Network > Network Interface.
Set the static IP of the NAS to 192.168.1.1 (this should match your subnet).
Save the settings.
Access Shared Folders:
Once both devices are configured, you should be able to access the NAS from your PC.
Open File Explorer and type \\192.168.1.1 into the address bar to access shared folders.
You may need to log in with your NAS credentials.
Additional Tips:
Check Hypercache Performance: Since you have SSDs set up for Hypercache, ensure that the caching is configured correctly to improve access speeds further.
Use a Fast Ethernet Connection: While you mentioned having a 2.4 LAN port, if possible, consider upgrading to a Gigabit Ethernet port for improved speeds.
This setup should give you a direct and fast connection to your NAS, allowing you to store and retrieve files efficiently.