02-24-2023, 01:34 PM
Based on your requirements, the TVS-h674-i5 is a good choice for your new NAS setup. For the M.2 SSDs, it's a good idea to use them for the operating system and applications, and you can consider purchasing two M.2 NVMe SSDs with a capacity of 256GB or 512GB. For the QM2-4P-384A card, it's not necessary for your use case, as you only need to connect the Coral AI accelerator card, which can be installed in the PCIe Gen 2 x1 slot directly.
https://community.home-assistant.io/t/pc...l/339521/9
Or you could use USB version for this card
https://coral.ai/products/accelerator/
As for the brand of M.2 SSDs, Seagate and WD are both reputable brands and you can choose either one. For the HomeAssistant Bluetooth USB, you can consider the ASUS USB-BT400 Bluetooth 4.0 USB Adapter, which is compatible with the HomeAssistant platform.
For the NAS setup, you can use either QTS or QuTS hero, depending on your specific needs. If you plan to use it mainly for media streaming and surveillance recording, QTS should suffice. However, if you need more advanced features such as data deduplication, you may consider using QuTS hero. It's also a good idea to separate the system, media, and NVR into different volumes, with RAID 5 for data protection.
As for the UPS, you can consider the APC BE600M1 Back-UPS, which provides reliable backup power and surge protection for your NAS and other equipment.
https://nascompares.com/cheapest-ups-for...-qnap-nas/
https://community.home-assistant.io/t/pc...l/339521/9
Or you could use USB version for this card
https://coral.ai/products/accelerator/
As for the brand of M.2 SSDs, Seagate and WD are both reputable brands and you can choose either one. For the HomeAssistant Bluetooth USB, you can consider the ASUS USB-BT400 Bluetooth 4.0 USB Adapter, which is compatible with the HomeAssistant platform.
For the NAS setup, you can use either QTS or QuTS hero, depending on your specific needs. If you plan to use it mainly for media streaming and surveillance recording, QTS should suffice. However, if you need more advanced features such as data deduplication, you may consider using QuTS hero. It's also a good idea to separate the system, media, and NVR into different volumes, with RAID 5 for data protection.
As for the UPS, you can consider the APC BE600M1 Back-UPS, which provides reliable backup power and surge protection for your NAS and other equipment.
https://nascompares.com/cheapest-ups-for...-qnap-nas/