Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Raid 5 vs SHR

#2
Yes, you can transfer your drives from your DS220+ to your DS920+ while changing the RAID configuration from RAID1 to RAID5 (can not change from standard RAID1/5 to SHR, need to restet the NAS for this). You can use the "Migration" feature in the Synology DSM to move your data and RAID configuration from the DS220+ to the DS920+. Before proceeding with the migration, ensure that both NAS devices are running the same version of DSM, and that you have a backup of your data in case something goes wrong.

The type of RAID you choose will depend on your specific needs and priorities. SHR (Synology Hybrid RAID) is a proprietary RAID solution developed by Synology that allows for flexibility in terms of drive capacity and RAID levels. It also allows for an easy expansion of storage capacity by adding new drives to the system. RAID 5 is another option that provides data protection by using parity data distributed across multiple drives, it can handle one drive failure without losing data. In this case, RAID5 is more suited for your needs as you want to get the most speed while having the possibility of 1 drive failing.

Yes, you can buy another 10 TB drive and install the new NAS with RAID5, and then later add another 10 TB drive (for a total of 4 drives) without having to reset the NAS. You can use the "Expansion" feature in the Synology DSM to add the new drive to the existing RAID configuration. However, keep in mind that during the expansion process, the RAID will be
Reply


Messages In This Thread
Raid 5 vs SHR - by ENQUIRIES - 01-22-2023, 07:30 PM
RE: Raid 5 vs SHR - by ed - 01-26-2023, 04:44 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)