Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

seagate NVMe drives

#1
i have a Asustor Lockerstor 4 Gen 2 AS6704T & i was just wondering which one of these to buy for casheing

Seagate FireCuda 530, 500GB, Internal SSD, M.2 PCIe Gen4 ×4 NVMe 1.4, transfer speeds up to 7300 MB which is £48.48

will this work well with the above NAS & do i need to use a heat sink or anything with this and if so what heat sink and/or thermal pads to buy.

if they work well going get four 2 for read & right speeds and two 4 gb ones for extra storage.

if this one not good what would you recommend please

NVMe must be best one"s thanks in advance

thanks in advance
Reply
#2
When choosing NVMe for caching you need to look at reliability ratings such as DWPD/MTBF. Here are a few on the list
https://nascompares.com/answer/nvme-m-2-...dwpd-mtbf/
Caching means a lot of read and write operations, unlike regular storage situation.
You would need to look at models with 0.5DWPD and above

970 pro – 0.66DWPD

Synology SNV3400 – 0.68DWPD

Seagate FireCuda 510 – 0.7 DWPD
Seagate IronWolf 525 – 0.7 DWPD
Seagate Firecuda 530 – 0.7 DWPD
Seagate PS5 Game drive – 0.7 DWPD

Seagate FireCuda 520 -0.9 DWPD
WD Red SN700 – 1.0DWPD

I hope this helps.
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)