Yesterday, 12:44 PM
Hello,
So I had a heck of a scare about an hour ago when I looked at my Nas during a backup process and I saw 3 out of 4 drives had a solid orange light.
My question right now has to do with a change I made the other day. Is there any reason to believe that hyper Backup would take significantly longer to backup to an HDD formated in exFat than if it were formated in ext4?
I'll try to keep this short but no promises. I watched spacerex a few days ago and he said to use exFat if you want to access your files on a windows PC (if the Nas completely fails I assume). So I moved my hbk file and reformatted the external HDD to exFat. Learned that the backup will fail the task if you try to relink the old file from the previous format(ext4).
So I started a completely new backup task and it seemed to work. My first attempt copied way more than I intended, my fault, I don't know. I deleted that and checked my settings and started again. About 7 hours later, I looked at my Nas hoping it was done and that is when I saw the 3 orange lights on the hard drive LEDs.
I just about died because I thought I had wiped the old ext4 backup so I thought I lost everything. I couldn't get logged in and it said login time out and another time it said check your network connection. I finally was able to login after about 30+ minutes of trying. Everything looked like it was still working and I could see my files. No error notification on any channel. I checked again shortly after and the 3 lights returned to blinking green.
The transfer rate dipped down below 1MB/s so I was shocked at how long it was taking. Previously I did a backup with the ext4 format and took about 4hrs 45min for 280GB, but right now with the exFat format I'm only at 253GB in 9hrs.
My temperatures seem to be ok. 36c on 3 of them and 40c on the other. I went ahead and adjusted my fan settings from cool mode to full mode and it has brought the temps down a few degrees so I'm just going to leave it like that, at least until this process finishes.
I'm definitely running an extended s.m.a.r.t. test on my drives as soon as possible.
Is there any reason the 3 lights turned orange for awhile but everything seems to be operating normally? I'm sure there are some things I forgot to mention that might be helpful but I will be glad to answer any questions you guys have.
Thanks for the help
Btw, I did recopy my original backup file on to the external HDD before I started the new backup task, so…I wouldn't have lost almost anything important anyways.
So I had a heck of a scare about an hour ago when I looked at my Nas during a backup process and I saw 3 out of 4 drives had a solid orange light.
My question right now has to do with a change I made the other day. Is there any reason to believe that hyper Backup would take significantly longer to backup to an HDD formated in exFat than if it were formated in ext4?
I'll try to keep this short but no promises. I watched spacerex a few days ago and he said to use exFat if you want to access your files on a windows PC (if the Nas completely fails I assume). So I moved my hbk file and reformatted the external HDD to exFat. Learned that the backup will fail the task if you try to relink the old file from the previous format(ext4).
So I started a completely new backup task and it seemed to work. My first attempt copied way more than I intended, my fault, I don't know. I deleted that and checked my settings and started again. About 7 hours later, I looked at my Nas hoping it was done and that is when I saw the 3 orange lights on the hard drive LEDs.
I just about died because I thought I had wiped the old ext4 backup so I thought I lost everything. I couldn't get logged in and it said login time out and another time it said check your network connection. I finally was able to login after about 30+ minutes of trying. Everything looked like it was still working and I could see my files. No error notification on any channel. I checked again shortly after and the 3 lights returned to blinking green.
The transfer rate dipped down below 1MB/s so I was shocked at how long it was taking. Previously I did a backup with the ext4 format and took about 4hrs 45min for 280GB, but right now with the exFat format I'm only at 253GB in 9hrs.
My temperatures seem to be ok. 36c on 3 of them and 40c on the other. I went ahead and adjusted my fan settings from cool mode to full mode and it has brought the temps down a few degrees so I'm just going to leave it like that, at least until this process finishes.
I'm definitely running an extended s.m.a.r.t. test on my drives as soon as possible.
Is there any reason the 3 lights turned orange for awhile but everything seems to be operating normally? I'm sure there are some things I forgot to mention that might be helpful but I will be glad to answer any questions you guys have.
Thanks for the help
Btw, I did recopy my original backup file on to the external HDD before I started the new backup task, so…I wouldn't have lost almost anything important anyways.
DS420j
DSM7.2.1
SHR
DSM7.2.1
SHR