+- ASK NC (https://ask.nascompares.com)
+-- Forum: Q&A (https://ask.nascompares.com/forumdisplay.php?fid=1)
+--- Forum: Networks (https://ask.nascompares.com/forumdisplay.php?fid=8)
+--- Thread: Seeking a 4-8 port 10 GbE RJ45 switch with stp+ uplink, no PoE? (/showthread.php?tid=2397)
Seeking a 4-8 port 10 GbE RJ45 switch with stp+ uplink, no PoE? - gatox - 11-18-2020
Seek to connect my QNAP TS-870 with dual port 10 GBE RJ45 to my 2 PCs running Intel 10 GbE RJ45 NICS. my previous Netgear 10 GbE switch was water damaged and need a replacement.
Any suggestions?
No PoE required but sfp+ required for uplink connectivity to my Unifi UDM Pro. small setup no need for anything over 4 to 8 10 GbE RJ45 ports
RE: Seeking a 4-8 port 10 GbE RJ45 switch with stp+ uplink, no PoE? - Ffej46521#$! - 11-21-2023
(11-18-2020, 05:47 PM)gatox Wrote: Seek to connect my QNAP TS-870 with dual port 10 GBE RJ45 to my 2 PCs running Intel 10 GbE RJ45 NICS. my previous Netgear 10 GbE switch was water damaged and need a replacement.Microtik CRS310-8G+2S+IN great hardware just bought one for under $200. However it has a learning cure to configure especially if you are not familiar with networking. It's actually a router but by design can be put into bridge mode to act as a fast layer 2 switch.
Any suggestions?
No PoE required but sfp+ required for uplink connectivity to my Unifi UDM Pro. small setup no need for anything over 4 to 8 10 GbE RJ45 ports
CRS310-8G+2S+IN and it turns out you CRS310-8G+2S+IN and it turns out you and it turns out you
RE: Seeking a 4-8 port 10 GbE RJ45 switch with stp+ uplink, no PoE? - Ekky - 11-26-2023
For your setup, I'd recommend checking out the Netgear XS708T or the TP-Link T1700G-28TQ. They both have 10 GbE RJ45 ports and SFP+ for uplink to your Unifi UDM Pro.