11-27-2022, 10:53 PM
Hi
Thank you NAS Compares for all you do to educate and help the community—you make a real difference and cut through the BS... with a bit of humour along the way too!
I'm now the proud owner of a TVS-H674-i5-32G—an impulse purchase on available sock after months of deliberating. My use case is amateur photography/video editing plus other usual benefits of NAS. I also have only two macOS users, one with 10Gbe into QXG-10G2T-X710 and the rare QNA-T310G1T 10Gbe Thunderbolt adapter.
My question is around the NVMe drives I'd like to use with QTS in a r/w cache configuation. Does it make any sense to go with Gen4 NVMes versus going with something safe, and still fast, like the WD Red SN700s? My thinking is that I'm going to max-out the 10Gbe with about 1,000 Mb/s because of the single 10Gbe connection, so what would be the point of spending extra money on Gen4 NVMes, which are faster, but that's not where my bottleneck is going to be.
If in the future I could get a cheap DUAL Thunderbolt 3 10Gbe connection, which don't seem to exist at reasonable prices yet, then maybe 2,000 Mb/s might be possible, but that still seems seems well within the capabilities of Gen3 NVMes at around 3 Gb/s internally within the NAS.
Any other solutions to try and get faster throughput to macOS seem prohibitively expensive, like 25Gbe setups requiring a lot more hardware at huge cost.
My hope is to hang on to this beast for a number of years swapping out/in bits over time, although I've just the price of the extended warranty for just two extra years and nearly choked!
Your thoughts and comments are appreciated...
Thank you
Thank you NAS Compares for all you do to educate and help the community—you make a real difference and cut through the BS... with a bit of humour along the way too!
I'm now the proud owner of a TVS-H674-i5-32G—an impulse purchase on available sock after months of deliberating. My use case is amateur photography/video editing plus other usual benefits of NAS. I also have only two macOS users, one with 10Gbe into QXG-10G2T-X710 and the rare QNA-T310G1T 10Gbe Thunderbolt adapter.
My question is around the NVMe drives I'd like to use with QTS in a r/w cache configuation. Does it make any sense to go with Gen4 NVMes versus going with something safe, and still fast, like the WD Red SN700s? My thinking is that I'm going to max-out the 10Gbe with about 1,000 Mb/s because of the single 10Gbe connection, so what would be the point of spending extra money on Gen4 NVMes, which are faster, but that's not where my bottleneck is going to be.
If in the future I could get a cheap DUAL Thunderbolt 3 10Gbe connection, which don't seem to exist at reasonable prices yet, then maybe 2,000 Mb/s might be possible, but that still seems seems well within the capabilities of Gen3 NVMes at around 3 Gb/s internally within the NAS.
Any other solutions to try and get faster throughput to macOS seem prohibitively expensive, like 25Gbe setups requiring a lot more hardware at huge cost.
My hope is to hang on to this beast for a number of years swapping out/in bits over time, although I've just the price of the extended warranty for just two extra years and nearly choked!
Your thoughts and comments are appreciated...
Thank you