dsm v7.01-upd5 vs 7.1++ on ds920+ 3rd party hdd/ssd/NVMecache - Printable Version +- ASK NC (https://ask.nascompares.com) +-- Forum: Q&A (https://ask.nascompares.com/forumdisplay.php?fid=1) +--- Forum: Before you buy Q&A (https://ask.nascompares.com/forumdisplay.php?fid=2) +--- Thread: dsm v7.01-upd5 vs 7.1++ on ds920+ 3rd party hdd/ssd/NVMecache (/showthread.php?tid=7466) |
dsm v7.01-upd5 vs 7.1++ on ds920+ 3rd party hdd/ssd/NVMecache - Enquiries - 08-30-2022 Greatings NASCompares / Robby, love the ytube chan. and following since school edu times from back in the days, i "just" purchesed a ds920+ on aug 2021 and migrated slowlly from ds212-> ds712-> ds920+ 4Gb/512GB readCache and lov all the tips and trix from this awesome chan ) keep the contenct up!! small consern abt updates of dsm v. from back in the days v6-> and currect v 7.01-upd5 , this is what im using, but dont wanna lag behind on old dsm v cous of security von.., but dont want the hassel of the "unverified" + vol flags critical blablabla, im reading this article "synology-3rd-party-hard-drives" but not sure what is the safe v. of dsm before the 3rd party hdd issues starts kindly advise.. on "dsm v7.01-upd5 vs 7.1++ on ds920+ 3rd party hdd/ssd/NVMecache" on bays 1+2, have SHR raid1 vol1 btrFS 3TB + 4TB both NAS IronWolfs, all is good no issues, no warnings on bay 3, have a test iScsi 256Gb 2.5" laptop drv as vol2 on bay 4, have a test SHR 2TB 3.5" old drv from 2011 as test vol3 big shot-out from norway, oslo NASCompares fan-boy ) RE: dsm v7.01-upd5 vs 7.1++ on ds920+ 3rd party hdd/ssd/NVMecache - Robbie - 09-02-2022 Hi buddy! Thanks for the kind words and for watching/reading the NASCompares content - you are a bloody hero! Back to your Question. So, first off, you do NOT need to worry about HDD/SSD verification/support messages, as the DSM 7.1 (and future) updates are NOT retroactive, i.e they will not change the setup of your device and the changes to HDD support/compatibility only affect NAS systems released after the 2021 SERIES (and even then, not all of them). I would definitely keep your firmware updated and unless you are using specific USB devices and/or Synology Moments/Photo Station (eg 'thing' recognition in the AI), then you should upgrade to DSM 7.1! Apologies for the slow reply buddy - Eddie (the Web Guy) covers ASKNC much more than me, whilst I make vids and articles etc. However, he is on a long, LONG overdue holiday this week and I am filling in as much as I can. |