+- ASK NC (https://ask.nascompares.com)
+-- Forum: Q&A (https://ask.nascompares.com/forumdisplay.php?fid=1)
+--- Forum: Before you buy Q&A (https://ask.nascompares.com/forumdisplay.php?fid=2)
+--- Thread: How to seperate direct 10 GBe and wifi 6 connection on Qnap TS-673A (/showthread.php?tid=7229)
How to seperate direct 10 GBe and wifi 6 connection on Qnap TS-673A - Enquiries - 07-20-2022
Hi there!
Thanks for your last answer regarding SSD-Caching.
I have my Qnap TS-673A up and running now. I upraded it with 2 PCIe cards: QXG-10G2TB and QXP-W6-AX200.
The 10 GBe Card goes directly into my workstation and i works very well with my PC having a static adress on the installed 10GBe card. Speeds are fine and filetransfer works.
Until i switch on the Wifi6 card in the Qnap. Suddenly the transfer speeds drop from 300 MB/s to 24 MB/s. It took me a moment till i realised what the problem was.
The Qnap takes the Wifi connection as a default connection and routes my filetransfers over my router back to the Qnap.
I did some hard searching on the net, but like its often times the problem, im missing the right search terminologies.
How do i have to setup the Qnap so the Wifi connection can be used for firmwareupdates, etc. and remote access, but everything that i sent or read (for example editing from an NLE) from the Qnap over my 10GBe connection on my workstation gets sent over the 10 GBe connection of the Qnap?
Help would be much appreciated! All the best Juri