+- ASK NC (https://ask.nascompares.com)
+-- Forum: Q&A (https://ask.nascompares.com/forumdisplay.php?fid=1)
+--- Forum: Networks (https://ask.nascompares.com/forumdisplay.php?fid=8)
+--- Thread: DS920 POE Switch and Reolink Cameras? (/showthread.php?tid=3384)
DS920 POE Switch and Reolink Cameras? - RSF - 04-08-2021
I have a DS920+ with a Netgear GS108 v3 connected to the Lan2 Port - I am trying to run 2 x Reolink RLC-423-5MP and 1 x RLC-520 but neither camera connects - I am powering the cameras with 12v PSU's - Without 12v power, neither camera shows any infra-red response - If I connect the camera (powered) directly via RJ45 there is no difference - When an RJ45 is connected, the Network Status shows: 100Mbps, Full duplex, MTU 1500 - I have a Synology Router attached to LAN1. - Do I need to uprgade the switch, move the switch or something else? - Cheers Richard