+- ASK NC (https://ask.nascompares.com)
+-- Forum: Q&A (https://ask.nascompares.com/forumdisplay.php?fid=1)
+--- Forum: Before you buy Q&A (https://ask.nascompares.com/forumdisplay.php?fid=2)
+--- Thread: Qnap nas storage pool deletion (/showthread.php?tid=12295)
Qnap nas storage pool deletion - Enquiries - 09-02-2025
I have a qnap ts464 running the most recent firmware with a 10tb hdd with all my files and system files in it Using MacOS as the client device. I wanted to change the setup so that i have an nvme drive to store my system files and a 20tb hdd to be just for file storage. i went to doing that by following: turned off the system, REMOVED the 10tb hdd, place the nvme and 20tb hdd, powered the unit, DELETED THE STORAGE POOL1 (system files saved in 10tb), created a new storage pool with the new setup, and created volumes and such. turned off the unit again and replaced the 10tb. after turning the unit back on, the unit doesnt show the 10tb as a drive and now i cant access all my files. how can i retrieve my files from the 10tb?
Appreciate your prompt response and will support you in return,
Niel