+- ASK NC (https://ask.nascompares.com)
+-- Forum: Q&A (https://ask.nascompares.com/forumdisplay.php?fid=1)
+--- Forum: Before you buy Q&A (https://ask.nascompares.com/forumdisplay.php?fid=2)
+--- Thread: TrueNAS install on jonsbo build (/showthread.php?tid=11823)
TrueNAS install on jonsbo build - Enquiries - 03-17-2025
When you installed true nas on your jonsbo build how did you get the NIC to work. I copied your bulid and i am getting no either netfound because the NIc is not intel based.
Any help would be appreciated.
Thanks,
Jason
RE: TrueNAS install on jonsbo build - ed - 03-21-2025
It sounds like you're running into an issue with the network interface card (NIC) not being recognized during your TrueNAS installation, likely because the NIC is not Intel-based.
In this situation, here are a few steps to help resolve the issue:
1. Check for Compatibility
TrueNAS NIC Support: TrueNAS generally has better support for Intel-based NICs, so if your NIC is not Intel, it may not be supported out-of-the-box. To confirm whether your NIC is supported, you can check TrueNAS’s hardware compatibility list or the drivers section.
2. Install Additional Drivers (If Needed)
If your NIC is not Intel-based, you may need to manually install drivers for your network card during or after the TrueNAS installation. You can find additional drivers in the TrueNAS forums or on the manufacturer’s website. Some NICs (especially Realtek and Broadcom) may need third-party drivers installed via the TrueNAS console.
For example, for Realtek NICs, you may need to download and install the appropriate drivers for TrueNAS from their community forums.
3. Use a USB Ethernet Adapter
If the onboard NIC continues to cause problems, one workaround is to use a USB to Ethernet adapter. You can plug this into one of your USB ports, and TrueNAS should automatically recognize it, especially if it's a commonly supported chipset like Realtek or ASIX.
4. BIOS Settings
Sometimes, network interfaces can be disabled in the BIOS. Double-check that your NIC is enabled in the system BIOS/UEFI settings.
5. Check for Firmware Updates
If you’re using a non-Intel NIC, make sure your NIC’s firmware is up-to-date. This can help with compatibility, especially with newer operating systems like TrueNAS.
6. USB Boot or Live Environment
If you’re still having trouble, consider booting into TrueNAS via a USB drive to see if it detects the NIC. This will help isolate whether the issue is during installation or with the OS configuration itself.
If these steps don’t resolve the issue, I’d recommend checking the TrueNAS forums for specific advice on your NIC model or switching to an Intel NIC for better compatibility.