+- ASK NC (https://ask.nascompares.com)
+-- Forum: Q&A (https://ask.nascompares.com/forumdisplay.php?fid=1)
+--- Forum: Before you buy Q&A (https://ask.nascompares.com/forumdisplay.php?fid=2)
+--- Thread: Asustor AS1002T fails to read HDD without initialization (/showthread.php?tid=11280)
Asustor AS1002T fails to read HDD without initialization - Enquiries - 10-11-2024
Dear Nascompares,
We store our important family data in an Asustor AS1002T with 2x8TB HDD configured as double RAID. All of a sudden we lost contact to the NAS from our PC. After pressing the reset button we still were not able to access it in a browser. Then with the ACC program we found it asks for initialization. But that would include erasing all data. The NAS does not have problem operating other HDDs. But when we insert our own HDDs, it again asks for initialization. We cannot read the data of the HDDs with other devices as well, even though Hard Disk Sentinel says they are in fine condition. How could we access the data on the HDDs? How could we make the NAS continue to run our HDDs without erasing data?
Thank you in advance for your help.
RE: Asustor AS1002T fails to read HDD without initialization - ed - 10-11-2024
Thank you for your message. It sounds like a challenging situation, but there is a potential solution to help you recover your data.
You could use a SATA docking station to connect your HDDs via USB to a computer. This method is quite straightforward, especially with RAID 1 configurations, as the data is mirrored on both drives. Once you connect the drives, you should be able to access and back up your important family data without any issues.
After you have successfully backed up your data, you will need to reinitialize the NAS and format the drives to ensure proper functionality moving forward.
RE: Asustor AS1002T fails to read HDD without initialization - balazsnba - 10-11-2024
(10-11-2024, 03:32 PM)ed Wrote: Thank you for your message. It sounds like a challenging situation, but there is a potential solution to help you recover your data.
You could use a SATA docking station to connect your HDDs via USB to a computer. This method is quite straightforward, especially with RAID 1 configurations, as the data is mirrored on both drives. Once you connect the drives, you should be able to access and back up your important family data without any issues.
After you have successfully backed up your data, you will need to reinitialize the NAS and format the drives to ensure proper functionality moving forward.
Thank you for the quick reply. Unfortunately, I do have issues reading the data via SATA docking station. I can see 3 partitions (sizes 255MB, 2TB, 5.5TB). I can see some system files on the 255MB partition. But both 2TB and 5.5TB partitions are shown completely empty. In Windows and in Linux Ubuntu systems as well. Both HDD produces this phenomena, as though our important family data was just erased in an instant from both HDDs. What could have happened? And most importantly is there any way to recover our data?
RE: Asustor AS1002T fails to read HDD without initialization - ed - 10-12-2024
You could try these
https://www.youtube.com/watch?v=bxQBSRJAETk&t=442s
https://www.youtube.com/watch?v=xdWwyme8Nk8