ASK NC
TerraMaster T9-423 and True nas - Printable Version

+- ASK NC (https://ask.nascompares.com)
+-- Forum: Q&A (https://ask.nascompares.com/forumdisplay.php?fid=1)
+--- Forum: Before you buy Q&A (https://ask.nascompares.com/forumdisplay.php?fid=2)
+--- Thread: TerraMaster T9-423 and True nas (/showthread.php?tid=10866)



TerraMaster T9-423 and True nas - Enquiries - 06-06-2024

Is it possible to put Truenas on the TerraMaster T9-423


RE: TerraMaster T9-423 and True nas - ed - 06-07-2024

Running TrueNAS on the TerraMaster T9-423 is technically feasible, provided that the device supports HDMI connectivity. TrueNAS is primarily designed to run on hardware that meets its system requirements, including compatible processors, RAM, and storage.

Here's a basic outline of the process:

Check Hardware Compatibility: Ensure that the TerraMaster T9-423 meets or exceeds the minimum hardware requirements specified by TrueNAS. This includes processor type and speed, RAM capacity, and available storage options.

Verify BIOS/UEFI Support: TrueNAS typically requires a system with BIOS or UEFI firmware that supports booting from external media such as USB drives or optical discs. Check if the TerraMaster T9-423 allows booting from these sources.

Prepare Installation Media: Create a bootable USB drive containing the TrueNAS installation image. You can download the TrueNAS installer from the official website and use a tool like Rufus or Etcher to create the bootable drive.

Boot from Installation Media: Connect the bootable USB drive to the TerraMaster T9-423 and boot from it. Access the BIOS or UEFI settings to select the USB drive as the primary boot device if necessary.

Install TrueNAS: Follow the on-screen prompts to install TrueNAS on the TerraMaster T9-423. You may need to partition and format the storage drives during the installation process.

Configure TrueNAS: Once the installation is complete, configure TrueNAS according to your requirements, including network settings, storage pools, datasets, and user accounts.

Finalize Setup: After configuring TrueNAS, you can access its web-based interface to manage and monitor your NAS system. From there, you can install additional plugins, set up file sharing, and configure other services as needed.

Keep in mind that installing TrueNAS on non-supported hardware may require additional effort and troubleshooting, and it may not provide the same level of stability or performance as running it on officially recommended hardware. Proceed with caution and be prepared to troubleshoot any compatibility issues that may arise.